|
1.
|
Clear description of the referenced document:
|
|
|
|
|
2.
|
Status of approval:
|
|
|
Approved
|
|
3.
|
Justification for the specific reference:
|
|
|
This standard defines a bit-serial data structure and coaxial cable interface for the transport of signals with a total payload of 2.970 Gb/s or 2.970/1.001 Gb/s. Such an interface is required in a UHD-based system as the video signal between the camera unit and display-unit as well as other devices in the system is recommended to be connected in standard-based ways as defined in 7.1.1.3.2 of F.Med-UHD.
|
|
4.
|
Current information, if any, about IPR issues:
|
|
|
None
|
|
5.
|
Other useful information describing the "Quality" of the document:
|
|
|
N/A
|
|
6.
|
The degree of stability or maturity of the document:
|
|
|
Stable
|
|
7.
|
Relationship with other existing or emerging documents:
|
|
|
N/A
|
|
8.
|
Any explicit references within that referenced document should also be listed:
|
|
|
Normative References/
1. "SMPTE ST 425-1:2011", Source Image Format and Ancillary Data Mapping for the 3Gb/s Serial Interface, 2011./
3. "SMPTE RP 184:2004", Specification of Jitter in Bit Serial Digital Systems, 2004./
5. "IEC 61169-8 (2007-2)", Part 8: Sectional Specification — R.F. Coaxial Connectors with Inner Diameter of Outer Conductor 65 mm (0256 in) with Bayonet Lock — Characteristic Impedance 50O (Type BNC) Annex A (Normative) Information for Interface Dimensions of 75O Characteristic Impedance Connector with Unspecified Reflection Factor, 2 2007./
Informative (Bibliographic) References/
2. "SMPTE 425-0:2012-06", SMPTE Bit-Srial Interfaces at 3 Gb/s — Roadmap for the 425 Document Suite, 06 2012./
4. "SMPTE ST 292-1:2012", 1.5 Gb/s Signal/Data Serial Interface, 2012./
6. "SMPTE ST 297:2006", Television — Serial Digital Fiber Transmission System for SMPTE 259M SMPTE 344M SMPTE 292 and SMPTE 424M Signals, 2006./
7. "SMPTE ST 2051:2010", Two-Frame Marker for 50-Hz and 60(/1.001)-Hz Progressive Digital Video Signals on 1.5 Gb/s and 3 Gb/s Interfaces, 2010./
8. "SMPTE RP 168:2009", Definition of Vertical Interval Switching Point for Synchronous Video Switching, 2009./
9. "SMPTE RP 198:1998", Bit-Serial Digital Checkfield for Use in High-Definition Interfaces, 1998./
10. "SMPTE EG 34:2004", Pathological Conditions in Serial Digital Video Systems, 2004.
|
|
9.
|
Qualification of
SMPTE:
|
|
|
|
|
10.
|
Other (for any supplementary information):
|
|
|
N/A
|
