�1���� Scope��������
�2���� References�������������
�3���� Definitions
������� 3.1���� Terms defined elsewhere������
������� 3.2���� Terms defined in this Recommendation����������
�4���� Abbreviations and acronyms�����������
�5���� Conventions�����������
�6���� Overview��
�7���� Definition of the principal modes of operation���������
������� 7.1���� Emulation mode�������
������� 7.2���� Native mode
������� 7.3���� Methods for discrimination between native and emulation mode���������
�8���� Interworking function: Specific items for consideration���������
���� ���8.1���� ITU-T T.30 procedures�����������
������� 8.2���� Data rate management for ITU-T V.34 facsimile���������
�9���� Capability negotiation/determination for V.152-to-T.38 interworking�������������
������� 9.1���� General��������
������� 9.2���� Negotiation using SDP������������
10���� Handling of stimuli between VBDoIP and FoIP���������
11���� Synchronization of state transitioning between VBDoIP and FoIP state
machines�������
Appendix I � Performance evaluation of both modes of operation����
������� I.1���� ��������� Gateway transfer delay�
������� I.2���� ��������� Gateway transfer delay variation������������
������� I.3���� ��������� Gateway information loss�����������
������� I.4���� ��������� Dejitter buffer aspects��
������� I.5���� ��������� Aspect of redundant packet transport�����
Appendix II � H.248 bearer establishment procedure examples����
������ II.1���� Introduction��
������ II.2���� MG state transitioning: MGC-strict controlled method versus MG
autonomous transitioning����
������ II.3���� Example network model���������
������ II.4���� Example signalling�����
Bibliography����