�1����
Scope�
�2����
References�
�3����
Definitions��
������� 3.1����
Terms
defined elsewhere����
������� 3.2����
Terms
defined in this Recommendation�������
�4����
Abbreviations
and acronyms��������
�5����
Reference
configuration����
�6����
Protection
need against lightning���
�7����
Site
classification��
������� 7.1����
Antenna
installed within, or attached to, the building
������� 7.2����
Antenna installed near the building��
�8����
Methods
of protection�����
������� 8.1����
General��
������� 8.2�
���Contact with the mains�������
������� 8.3����
Direct
lightning strike protection�����
�9����
Protection
requirements���
������� 9.1����
General��
������� 9.2����
Antenna
installed within, or attached to, the building
������� 9.3����
Antenna
installed near to the building����������
������� 9.4����
Earthing
and bonding���������
������� 9.5����
Selection
and dimensioning of the surge protection devices (SPDs)�
10���� Responsibilities
Annex A �
Direct lightning to the structure: equipotential bonding of a shielded cable at
the entrance of the structure����
Appendix
I� Antenna on buildings used as air
termination of the LPS����
Appendix II
� Generic risk assessment����
������ II.1����
Site
with a roof antenna deemed to be low risk�������
������ II.2����
Risk
calculations�����
Appendix
III � Example: Antenna installed near a building����
����� III.1����
General���
����� III.2����
Building
characteristics�������
����� III.3����
Characteristics
of the services���������
����� III.4����
Characteristics
of the internal systems���������
����� III.5����
Zones
definition in the structure�������
����� III.6����
Expected
dangerous events to the structure�
����� III.7����
Risk
assessment for the unprotected structure���������
����� III.8���� Selected protection measures���������
� ����III.9����
Risk assessment related to the protected structure���
����
III.10���� SPDs����