�1���
�Scope�
�2��� �References�
�3��� �Definitions��
�4��� �Procedure for evaluating the
e.m. interference�������
������ �4.1��� �General��
������ �4.2��� �Interference frame��
������ �4.3��� �Collection of
electrical information of inducing plants�����������
������ �4.4��� �Evaluation of the
interference results and compliance with the management voltages�
�5��� �Interference situations to be
examined������
������ �5.1��� �Coupling types to be considered����
������ �5.2��� �Reference influence distance�����������
�6��� �Management voltages������
������ �6.1��� �Criteria defining the application of
the management voltages
������ �6.2���
�Danger voltages: Limits������
������ �6.3��� �Damage voltages���
������ �6.4��� �Immunity
voltages��
������ �6.5��� �Noise voltage:
Limit�����������
�7��� �Reference
interference conditions�
������ �7.1��� �General��
������ �7.2��� �Conditions related to the inducing
plant�������
������ �7.3��� �Conditions related to the
telecommunication plant���
�8��� �Determination of compliance
with the management voltages����������
������ �8.1��� �General��
������ �8.2��� �Superposition of the
effects
������ �8.3��� �Determination of
compliance through calculations����
������ �8.4��� �Determination of
compliance through measurements
�9��� �Operator's responsibilities
10��� �Management of interference��������
����� �10.1��� �General�
����� �10.2��� �Plant life
����� �10.3��� �Exchange of
information����
����� �10.4��� �Plant documentation����������
Annex A � Method for the evaluation of the reference influence
distance��� �
������ �A.1��� �Inductive coupling�
������ �A.2��� �Conductive coupling����������
Appendix I � Weighting factors for use in
determining the psophometrically weighted voltage��� �
Appendix II � Values for the
quantities affecting the� reference influence distance for inductive coupling���
�
����� �II.1��� �Guidance values�����
����� �II.2��� �Values of the
parameters for the RID evaluation: Inductive coupling�
����� �II.3��� �Values of the
parameters for the RID evaluation: Conductive coupling���������
Appendix III � Steps for determining the RID
values due to a.c. power or electrified traction line��� �
Bibliography��� �