�1���� Scope
�2���� References
�3���� Definitions
������� 3.1���� Terms defined elsewhere
������� 3.2���� Terms defined in this Recommendation
�4���� Abbreviations and acronyms
�5���� Management architecture
�6���� Network management protocol
�7���� Managed objects
������� 7.1���� Line configuration objects
������� 7.2���� Channel configuration objects
������� 7.3���� Data path configuration objects
������� 7.4���� Line failures
������� 7.5���� Channel failures
����� ��7.6���� Data path failures
������� 7.7���� Line performance monitoring objects
������� 7.8���� Channel performance monitoring objects�
������� 7.9���� Data path performance monitoring objects�
������ 7.10���� Line test, diagnostics and status objects
������ 7.11���� Channel test, diagnostics and status objects
������ 7.12���� Data path test, diagnostics and status objects
������ 7.13���� Inventory objects
������ 7.14���� Link State related managed objects
�8���� Procedures for performance monitoring functions�
������� 8.1���� Line transmission states
������� 8.2���� Threshold reports
������� 8.3���� Unavailable and available state filters�
������� 8.4���� TR1 filter
������� 8.5���� TR2 filter
������� 8.6���� Evaluation of TR1
������� 8.7���� Evaluation of TR2
������� 8.8���� Threshold report evaluation during transmission state changes
������� 8.9���� Performance history storage in network elements
������ 8.10���� Register size
������ 8.11���� Parameter counts
������ 8.12���� Date/time-stamping of reports
������ 8.13���� Inhibiting performance monitoring parameters
Annex A � Physical layer management for reverse power feeding
of remote access equipment
������� A.1���� Scope
������� A.2���� References
������� A.3���� Definitions
������� A.4���� Abbreviations and acronyms
������� A.5���� DPU and NT management architecture
������� A.6���� Network management protocol
������� A.7���� DPU Northbound managed objects
Annex B � Additional managed objects specific to [ITU-T G.9702]
������� B.1���� Line configuration objects
������� B.2���� Inventory objects
Annex C � to Annex R
Annex S � Management for network termination software upgrade process
������� S.1���� Scope
������� S.2���� References
������� S.3���� Definitions
������� S.4���� Abbreviations and acronyms
������� S.5���� DPU management architecture
������� S.6���� Network management protocol
������� S.7���� Managed objects
Annex T � Annex X, Annex D and Annex T of ITU-T G.9701 � Managed objects
������� T.1���� Overview of Annex X, Annex D and Annex T of ITU-T G.9701
managed objects
������� T.2���� Annex X, Annex D and Annex T of ITU-T G.9701 configuration
objects
��� ����T.3���� Annex X, Annex D and Annex T of ITU-T G.9701 status objects
������� T.4���� Annex X, Annex D and Annex T of ITU-T G.9701 inventory objects
������� T.5���� Annex X, Annex D and Annex T of ITU-T G.9701 diagnostics and
monitoring objects
Annex U to � Annex W
Annex X � Cross-layer link state objects
������� X.1���� Overview of cross-layer link state objects
������� X.2���� Cross-layer low power mode control
Appendix I � Broadband Forum considerations on the FTTdp deployment scenario
Bibliography