�1���� Scope����������
�2���� References
�3���� Definitions�
�4���� Abbreviations and acronyms�������������
�5���� Reference models�
������� 5.1���� VTU functional model
������� 5.2���� User plane protocol reference model�
������� 5.3���� Management plane reference model�
������� 5.4���� Application reference models
�6���� Profiles�������
������� 6.1���� Definition��������
������� 6.2���� Profile parameter definitions�
������� 6.3���� Profile compliance�������
�7���� Transmission medium interface characteristics���������
������� 7.1���� Duplexing method and band plan construction��������������
������� 7.2���� Power spectral density (PSD)�
������� 7.3���� Termination impedance������������
������� 7.4���� Longitudinal conversion loss���
�8���� Transport protocol specific transmission convergence (TPS‑TC)
function�������
������� 8.1���� The user data TPS‑TC�
������� 8.2���� Management TPS‑TC (MPS‑TC)�������������
������� 8.3���� Network timing reference TPS‑TC (NTR‑TC)�����
������� 8.4���� Time‑of‑day TPS‑TC (ToD‑TC)�
�9���� Physical media specific transmission convergence (PMS‑TC) sublayer������������
������� 9.1���� PMS‑TC functional model���������
������� 9.2���� Scrambler��������
������� 9.3���� Forward error correction����������
������� 9.4���� Interleaving����
������� 9.5���� Framing������������
������� 9.6���� Impulse noise protection (INPp)������������
������� 9.7���� Delay�
������� 9.8���� Bit error ratio (BER)�����
������� 9.9���� Delay variation��������������
10���� Physical media dependent (PMD) function
������ 10.1���� PMD functional model�������������
������ 10.2���� DMT superframe��������
������ 10.3���� Symbol encoder for data symbols�������
������ 10.4���� Modulation���
������ 10.5���� Symbol encoder for sync symbol���������
������ 10.6���� Symbol encoder for initialization����������
11���� Operation and maintenance (OAM)�������������
������ 11.1���� OAM functional model�������������
������ 11.2���� VDSL2 management entity (VME)�������
������ 11.3��� �OAM primitives�����������
������ 11.4���� OAM parameters�������
������ 11.5���� Data gathering function�����������
12���� Link activation methods and procedures����
������ 12.1���� Overview�������
������ 12.2���� Special operations channel (SOC)��������
������ 12.3���� Initialization procedure������������
������ 12.4���� Loop diagnostic mode procedures������
������ 12.5���� Fast start-up�
13���� On‑line reconfiguration (OLR)����������
������ 13.1���� Types of on‑line reconfiguration����������
������ 13.2���� Control parameters���
������ 13.3���� Timing of changes in subcarrier configuration
������ 13.4���� Receiver initiated procedure�
14���� Electrical requirements�������
������ 14.1���� Termination impedance model������������
������ 14.2���� Service splitters�����������
Annex A � Region A (North America)����
������� A.1���� Band plan�������
������� A.2���� Limit PSD masks�����������
������� A.3���� UPBO reference PSDs���������������
Annex B � Region B (Europe)����
������� B.1���� Band plans������
������� B.2���� Limit PSD mask options�������������
������� B.3���� UPBO reference PSDs
������� B.4���� Template PSD
������� B.5���� Compliance����
Annex C � Region C (Japan)����
������� C.1���� Band plan��������
������� C.2���� Limit PSD masks�����������
������� C.3���� VDSL2 system with PSD reduction at frequencies below DPBOFMAX���
������� C.4���� Upstream power back‑off (UPBO) PSD masks
����� Page
������� C.5���� Service Splitter�������������
������� C.6���� Test loops and crosstalk disturbers������
Annex D���� ���������
Annex E���� ���������
Annex F���� ���������
Annex G���� ��������
Annex H���� ���������
Annex J���� ����������
Annex K���� ���������
Annex L � TPS‑TC functional descriptions����
������� L.1���� STM transmission convergence (STM‑TC) function�������
������� L.2���� ATM transmission convergence (ATM‑TC) function������
������� L.3���� Packet transmission convergence function (PTM‑TC)��
Annex M � Time‑of‑day distribution over
VDSL2 links����
������� M.1���� Time‑of‑day distribution operational overview������������
������� M.2���� Definitions����
������� M.3���� Abbreviations��������������
������� M.4���� VTU functional model��������������
������� M.5���� TPS‑TC function����������
������� M.6���� eoc communication protocol
������� M.7���� ToD TPS‑TC (ToD‑TC)
������� M.8���� Mapping of OH data�
������� M.9���� eoc transmission protocol������
������ M.10���� Frequency synchronization command�������������
������ M.11���� Time synchronization command and responses����������
������ M.12���� Updates to initialization���������
Annex N � Region D (China)����
������� N.1���� Band plans�����
������� N.2���� Limit PSD mask options������������
Annex O���� ��������
Annex P � Short reach VDSL2 with reduced power and
enhanced data rate����
������� P.1���� Scope
������� P.2���� Reduced ATP�
������� P.3���� Minimum bidirectional net data rate capability���������������
������� P.4���� ITU-T G.998.4 Annex D support for enhanced net data rates with
ITU-T G.998.4�������������
������� P.5���� SRA support���
������� P.6���� TPS-TC��������������
Annex Q � Enhanced data rate 35 MHz VDSL2 with
4.3125 kHz subcarrier spacing����
������� Q.1���� Scope���������������
������� Q.2��� �Capabilities related to the profile���������
������� Q.3���� ITU-T
G.998.4 Annex D support for enhanced net data rates���
������� Q.4���� SRA
support��
������� Q.5���� TPS-TC�������������
������� Q.6���� Additional
changes to ITU-T G.993.2 for operation according to profile 35b�������
Annex R���� ���������
Annex S���� ���������
Annex T���� ���������
Annex U���� ��������
Annex V���� ���������
Annex W���� �������
Annex X � ITU-T G.993.5‑friendly ITU-T G.993.2
operation in the downstream direction����
������� X.1���� Power management commands and responses (clause 11.2.3.9)����������
���� ���X.2���� Initialization procedure (supplements clause 12.3)�������
Annex Y � Full ITU-T G.993.5-friendly ITU-T G.993.2
operation����
������� Y.1���� Initialization procedure (supplements clause 12.3)�������
������� Y.2���� R-MSG1 (supplements clause 10.3.2.2 of [ITU-T G.993.5])���������
������� Y.3���� O‑TA_UPDATE (supplements clause 10.4.2.1 of [ITU-T
G.993.5])������������
������� Y.4���� R‑P‑VECTOR 2 (replaces clause 10.4.4.5 of [ITU-T
G.993.5])�������
������� Y.5���� O‑PMS (supplements clause 10.5.2.1 of [ITU-T G.993.5])�����������
������� Y.6��� �eoc messages for backchannel configuration (replaces clause 8.1
of [ITU‑T G.993.5])���
������� Y.7���� Loop diagnostic mode procedures (replaces clause 12.4)�����������
Appendix I � Example values of DPBO parameters to protect ADSL2plus for clause
C.3����
������� I.1���� Example PSD parameters����������
������� I.2���� Example Cable parameters�������
������� I.3���� Example frequency parameters�������������
Appendix II � Impact of loop and VTU impedance mismatch
on the Hlog accuracy����
Bibliography����