�1����
Scope
�2���� References
�3���� Definitions and abbreviations
������� 3.1���� Definitions
������� 3.2���� Abbreviations
�4���� Reference models
������� 4.1���� System reference model
������� 4.2���� ATU reference model
�5���� Transport capacity
�6����
ATU interfaces
������� 6.1���� ATU interface for ATM transport
������� 6.2���� ATU PMD to TC logical interface
�7���� ATU functional characteristics
������� 7.1���� ATM transport protocol specific
functionalities
����������������� 7.1.1���� Payload transfer delay
����������������� 7.1.2���� ATM cell specific functionality
����������������� 7.1.3���� Framing structure for ATM transport
������� 7.2���� Network Timing Reference
����������������� 7.2.1���� Optional NTR capability
��������������� ��7.2.2���� Transport of the NTR
������� 7.3���� Framing
����������������� 7.3.1���� Relationship to G.992.1 framing
����������������� 7.3.2���� Bit ordering
����������������� 7.3.3���� Data framing and reference points
������� 7.4���� Scrambler
������� 7.5���� Reed-Solomon Forward Error
Correction
����������������� 7.5.1���� Reed-Solomon coding
����������������� 7.5.2���� Reed-Solomon Forward Error Correction superframe synchronization
������� 7.6���� Interleaver
������� 7.7���� Tone ordering
������� 7.8�
���Constellation encoder
����������������� 7.8.1���� Bit extraction
����������������� 7.8.2���� Constellation encoder
������� 7.9���� Gain scaling
������ 7.10���� Modulation
���������������� 7.10.1���� Subcarriers
���������������� 7.10.2���� Modulation by the inverse discrete Fourier transform (IDFT)
���������������� 7.10.3���� Synchronization symbol
���������������� 7.10.4���� Upstream data pattern
���������������� 7.10.5���� Downstream data pattern
������ 7.11���� Cyclic prefix
������ 7.12� ���Transmitter dynamic range
���������������� 7.12.1���� Maximum clipping rate
���������������� 7.12.2���� Noise/Distortion floor
���������������� 7.12.3���� Transmitter spectral masks
�8���� Embedded Operations Channel (eoc)
������� 8.1���� eoc introduction
����������������� 8.1.1���� eoc messages overview
����������������� 8.1.2���� eoc protocol overview
������� 8.2���� eoc message encoding
����������������� 8.2.1���� ADDRESS field (# 1)
����������������� 8.2.2���� Data or opcode field (# 2)
������������ �����8.2.3���� BYTE PARITY field (# 3)
����������������� 8.2.4���� AUTONOMOUS MESSAGE field (# 4)
����������������� 8.2.5���� INFORMATION field (# 5)
������� 8.3���� eoc message description
����������������� 8.3.1���� Latching bidirectional eoc messages
� ����������������8.3.2���� End of Data message (EOD)
����������������� 8.3.3���� Dying Gasp message (DGASP)
����������������� 8.3.4���� Autonomous messages
����������������� 8.3.5���� Data registers in the ATU‑R
������� 8.4���� eoc protocol
��������������� ��8.4.1���� Outstanding eoc messages
����������������� 8.4.2���� eoc state transitions
������� 8.5���� Clear eoc
�9���� ADSL overhead channel
������� 9.1���� The ADSL Overhead Control (aoc)
channel introduction
����������������� 9.1.1���� Bit swap channel
����������������� 9.1.2���� Superframe counting
������� 9.2���� aoc message encoding
����������������� 9.2.1���� aoc message header encoding
����������������� 9.2.2���� Profile Management Request
����������������� 9.2.3���� Profile Management Acknowledge
����������������� 9.2.4���� Bit swap request message encoding
����������������� 9.2.5���� Extended bit swap request message encoding
����������������� 9.2.6���� Bit swap acknowledge message encoding
������� 9.3���� Bit swap operation
����������������� 9.3.1���� Bit swap � Receiver
����������������� 9.3.2���� Bit swap � Transmitter
������� 9.4���� aoc protocol
10���� In-service performance monitoring and surveillance
������ 10.1���� ADSL line related primitives
���������������� 10.1.1���� ADSL line related near-end anomalies
���������������� 10.1.2���� ADSL line related far‑end anomalies
���������������� 10.1.3���� ADSL line related near‑end defects
���������������� 10.1.4���� ADSL line related far-end defects
������ 10.2���� ATM data path related primitives
����������������
10.2.1���� ATM data path related near‑end
anomalies
���������������� 10.2.2���� ATM data path related far‑end anomalies
���������������� 10.2.3���� ATM data path related near‑end defects
���������������� 10.2.4���� ATM data path related far‑end defects
������ 10.3���� Other ADSL indicators, parameters
and signals
���������������� 10.3.1���� Other near‑end primitives
���������������� 10.3.2���� Other far‑end primitives
���������������� 10.3.3���� Failure count parameters
������ 10.4���� Test parameters
���������������� 10.4.1���� Near‑end test parameters
���������������� 10.4.2���� Far‑end test parameters
������ 10.5���� Other failures and parameters
11���� Initialization
������ 11.1���� Overview
���������������� 11.1.1���� Basic functions of initialization
���������������� 11.1.2���� Transparency to methods of separating upstream and downstream signals
���������������� 11.1.3���� Initialization Reset Procedure
������ 11.2���� Handshake � ATU‑C
������ 11.3���� Handshake � ATU‑R
������ 11.4���� Handshake power levels
������ 11.5���� Escape from Handshake to Fast
Retrain
���������������� 11.5.1���� C‑QUIET-EF1
���������������� 11.5.2���� R‑QUIET-EF1
������ 11.6���� Power levels in Transceiver
Training, Channel Analysis and Exchange
������ 11.7��� �Transceiver training � ATU‑C
���������������� 11.7.1���� C‑QUIET2
���������������� 11.7.2���� C‑PILOT1
���������������� 11.7.3���� C‑PILOT1A
���������������� 11.7.4���� C‑QUIET3A
���������������� 11.7.5���� C‑REVERB1
���������������� 11.7.6���� C‑PILOT2
����������������
11.7.7���� C‑ECT
���������������� 11.7.8���� C‑REVERB2
���������������� 11.7.9���� C‑QUIET5
��������������� 11.7.10���� C‑PILOT3
��������������� 11.7.11���� C‑REVERB3
������ 11.8���� Transceiver training � ATU‑R
���������������� 11.8.1���� R‑QUIET2
���������������� 11.8.2���� R‑REVERB1
���������������� 11.8.3���� R‑QUIET3
���������������� 11.8.4���� R‑ECT
���������������� 11.8.5���� R‑REVERB2
������ 11.9���� Channel analysis (ATU‑C)
���������������� 11.9.1���� C‑SEGUE1
���������������� 11.9.2���� C‑RATES1
���������������� 11.9.3���� C‑CRC1
���������������� 11.9.4���� C-MSG1
���������������� 11.9.5���� C‑CRC2
���������������� 11.9.6���� C‑MEDLEY
����� 11.10���� Channel analysis (ATU‑R)
��������������� 11.10.1���� R-SEGUE1
��������������� 11.10.2���� R‑REVERB3
��������������� 11.10.3���� R‑SEGUE2
��������������� 11.10.4���� R‑RATES1
��������������� 11.10.5���� R‑CRC1
��������������� 11.10.6���� R-MSG1
��������������� 11.10.7���� R‑CRC2
��������������� 11.10.8���� R‑MEDLEY
��������������� 11.10.9���� R‑REVERB4
����� 11.11���� Exchange � ATU‑C
��������������� 11.11.1���� C‑REVERB4
��������������� 11.11.2���� C‑SEGUE2
��������������� 11.11.3���� C-RATES-RA
��������������� 11.11.4���� C-CRC-RA1
��������������� 11.11.5���� C-MSG-RA
������������� ��11.11.6���� C-CRC-RA2
��������������� 11.11.7���� C-REVERB-RA
��������������� 11.11.8���� C-SEGUE-RA
��������������� 11.11.9���� C-MSG2
�������������� 11.11.10���� C‑CRC3
�������������� 11.11.11���� C‑RATES2
�������������� 11.11.12���� C‑CRC4
���������� ����11.11.13���� C‑B&G
�������������� 11.11.14���� C‑CRC5
�������������� 11.11.15���� C‑REVERB5
�������������� 11.11.16���� C‑SEGUE3
����� 11.12���� Exchange � ATU‑R
��������������� 11.12.1���� R‑SEGUE3
��������������� 11.12.2���� R-MSG-RA
��������������� 11.12.3���� R-CRC-RA1
��������������� 11.12.4���� R-RATES-RA
��������������� 11.12.5���� R-CRC-RA2
��������������� 11.12.6���� R-REVERB-RA
��������������� 11.12.7���� R-SEGUE-RA
��������������� 11.12.8���� R-MSG2
��������������� 11.12.9���� R‑CRC3
������� �������11.12.10���� R‑RATES2
�������������� 11.12.11���� R‑CRC4
�������������� 11.12.12���� R‑REVERB5
�������������� 11.12.13���� R‑SEGUE4
�������������� 11.12.14���� R‑B&G
�������������� 11.12.15���� R‑CRC5
�������������� 11.12.16���� R‑REVERB6
��������� �����11.12.17���� R‑SEGUE5
����� 11.13���� Details of initialization timing
12���� Fast Retrain
������ 12.1���� Fast Retrain overview
���������������� 12.1.1���� Profile requirements
������ 12.2���� Definition of Fast Retrain signals
���������������� 12.2.1���� Fast Retrain Signal power levels
������ 12.3���� Fast Retrain Procedure
���������������� 12.3.1���� ATU‑C initiated from SHOWTIME
���������������� 12.3.2���� ATU‑R initiated from SHOWTIME
���������������� 12.3.3���� Channel measurement
������������� ���12.3.4���� Selection of Tx power levels
���������������� 12.3.5���� Transceiver retraining
���������������� 12.3.6���� Profile exchange
������ 12.4���� Fast Retrain Procedure � Unknown
Profile Transition
������ 12.5���� Fast Retrain Procedure � Initiated
from L3 or Recommendation G.994.1
������ 12.6���� Abort of Fast Retrain
���������������� 12.6.1���� Abort of an ATU‑C initiated Fast Retrain Request
���������������� 12.6.2���� Abort of an ATU‑R initiated Fast Retrain Request
������ 12.7���� Fast Retrain Truncate
������ 12.8���� Fast Retrain Reset Procedure
13���� Power management
������ 13.1���� Introduction
������ 13.2���� ADSL link states
������ 13.3���� Link state transitions
������ 13.4���� Link transition procedures
���������������� 13.4.1���� Transitions from L0 to L0 (T0a, T0b, T0c)
���������������� 13.4.2���� Transition from L0 to L1 (T0d)
���������������� 13.4.3���� Transitions from L1 to L0 (T1a, T1b, T1c, T1d)
���������������� 13.4.4���� Transitions from L0 or L1 to L3 (T0e, T0f, T1e, T1f)
���������������� 13.4.5���� Transitions from L3 to L0 (T3a, T3b)
������ 13.5���� eoc Handshake
���������������� 13.5.1���� ATU‑R initiated eoc Handshake
���������������� 13.5.2���� ATU‑C initiated eoc Handshake
Annex A � Non-overlapped spectrum operation
������� A.1���� ATU‑R transmitter PSD mask
����������������� A.1.1���� Passband PSD ripple and group delay
����������������� A.1.2���� Transmit power spectral density and aggregate power level
������� A.2���� ATU‑C transmitter PSD mask
����������������� A.2.1���� Passband PSD ripple and group delay
����������������� A.2.2���� Transmit power spectral density and aggregate power level
Annex B � Overlapped spectrum operation
������� B.1���� ATU-R transmitter PSD mask
����������������� B.1.1���� Passband PSD ripple and group delay
����������������� B.1.2���� Transmit power spectral density and aggregate power level
������� B.2���� ATU‑C transmitter PSD mask
����������������� B.2.1���� Passband PSD ripple and group delay
����������������� B.2.2���� Transmit power spectral density and aggregate power level
Annex C � ADSL above POTS co-existing in the same
binder as TCM-ISDN DSL
������� C.1���� Scope
������� C.2���� Definitions and abbreviations
����������������� C.2.1���� Definitions
���������������� �C.2.2���� Abbreviations
������� C.3���� Reference models
����������������� C.3.1���� ATU‑C transmitter reference model (replaces figure in 4.2)
����������������� C.3.2���� ATU‑R transmitter reference model (replaces figure in 4.2)
����������������� C.3.3����ATU transmitter timing model (new)
������� C.4���� ATU interfaces
����������������� C.4.1���� ATM interface for ATM transport (replaces figure in 6.1)
������� C.5���� ATU functional characteristics
(pertains to clause 7)
����������������� C.5.1���� Payload transfer delay (supplements 7.1.1)
����������������� C.5.2���� Framing (pertains to 7.3)
����������������� C.5.3���� Modulation (pertains to 7.10)
����������������� C.5.4���� Transmitter spectral mask (replaces 7.12.3)
����������������� C.5.5���� Dual Bitmap (new)
����������������� C.5.6���� Rate Converter (new)
����������������� C.5.7���� FEXT Bitmap (new)
������� C.6���� aoc on-line adaptation and
reconfiguration (pertains to clause 9)
����������������� C.6.1���� Bit swap request message encoding (replaces 9.2.4)
����������������� C.6.2���� Extended bit swap request message encoding (supplements 9.2.5)
����������������� C.6.3���� Bit swap acknowledge message encoding (supplements 9.2.6)
������� C.7���� In-service performance monitoring
and surveillance (pertains to clause 10)
����������������� C.7.1���� ADSL line related primitives (pertains to 10.1)
����������������� C.7.2���� Test parameters (supplements 10.4)
������� C.8���� Initialization
����������������� C.8.1���� Initialization with Hyperframe (new)
����������������� C.8.2���� Escape from Handshake to Fast Retrain (replaces 11.5)
����������������� C.8.3���� Transceiver training � ATU‑C (supplements 11.7)
����������������� C.8.4���� Transceiver training � ATU‑R (supplements 11.8)
����������������� C.8.5���� Channel analysis (ATU‑C)
(supplements 11.9)
����������������� C.8.6���� Channel analysis (ATU‑R) (supplements 11.10)
����������������� C.8.7���� Exchange � ATU‑C (supplements
11.11)
����������������� C.8.8�� ��Exchange � ATU‑R (supplements 11.12)
������� C.9���� Fast retraining (supplements
clause 12)
����������������� C.9.1���� Fast Retrain overview (pertains to 12.1)
����������������� C.9.2���� Definition of Fast Retrain signals (supplements 12.2)
��������� ��������C.9.3���� Fast Retrain procedure
(supplements 12.3)
����������������� C.9.4���� Initiated from L3 or Recommendation G.994.1 (replaces 12.5)
������ C.10���� Power management (pertains to
clause 13)
���������������� C.10.1���� Transition from L0 to L1 (T0d) (pertains to 13.4.2)
Annex D � System performance for North America
������� D.1���� System performance for North
America
����������������� D.1.1���� Required test cases
����������������� D.1.2���� Extended reach cases
Annex E � System performance for Europe
������� E.1���� System performance for Europe
Appendix I
Appendix II � Guide to scenarios for the implementation
of the various procedures in Recommendations G.994.1 and G.992.2
Appendix III � Compatibility with other Customer
Premises Equipment