Table of Contents

�1���� Scope����������
�2���� References
�3���� Definitions
������� 3.1���� Terms defined elsewhere�������
������� 3.2���� Terms defined in this Recommendation�����������
�4���� Abbreviations and acronyms�������������
�5���� Conventions������������
�6���� Supervision��������������
������� 6.1�� ��Alarm reporting control�����������
������� 6.2���� Defects�����������
������� 6.3���� Consequent actions��
������� 6.4���� Defect correlations����
������� 6.5���� Performance filters���
�7���� Information flow across reference points����
�8���� Generic processes�
������� 8.1���� Blank clause��
������� 8.2���� Alignment processes
������� 8.3���� Signal quality supervision�������
������� 8.4���� Blank clause��
������� 8.5���� OTUk forward error correction (FEC) processing�����������
������� 8.6���� Trail trace identifier (TTI) processing��
������� 8.7� ���Payload structure indication (PSI) acceptance processes�����������
������� 8.8���� Status information (STAT) acceptance process
������� 8.9���� Generic AIS generation and detection
������ 8.10���� Generic layer fault processing�������������
������ 8.11���� OTSi modulator and demodulator processes
�9���� OTS-O layer functions����������
������� 9.1���� Connection functions
������� 9.2���� Termination functions��������������
������� 9.3���� Adaptation functions
10���� OMS-O layer functions�������
������ 10.1���� Connection functions��������������
������ 10.2���� Termination functions������������
������ 10.3���� Adaptation functions
������ 10.4���� Sub-layer functions��
11���� OSC (layer) functions����������
������ 11.1���� Connection functions��������������
������ 11.2���� Termination functions������������
������ 11.3���� Adaptation functions
12���� OTSiA and OCh (layer) functions����
������ 12.1���� Connection functions��������������
OTSiA|OCh_C_MP:����
������ 12.2���� Termination functions������������
������ 12.3���� Adaptation functions
������ 12.4���� Sub-layer functions��
13���� OTU (layer) functions����������
������ 13.1���� Connection functions��������������
������ 13.2���� Termination functions������������
������ 13.3���� Adaptation functions
������ 13.4���� Sub-layer functions��
14���� ODU (layer) functions���������
������ 14.1���� Connection functions��������������
������ 14.2���� Termination functions������������
������ 14.3���� Adaptation functions
������ 14.4���� COMMS functions����
������ 14.5���� Sub-layer functions��
������ 14.6���� Blank clause
15���� FlexO functions�����
������ 15.1���� Connection functions��������������
������ 15.2���� Termination functions������������
������ 15.3���� Adaptation functions
16���� OTSi adaptation functions�
������ 16.1���� OTSi to OTUk adaptation function (OTSi/OTUk_A)������
������ 16.2���� OTSi to OTUkV adaptation function (OTSi/OTUkV_A)
������ 16.3���� OTSiG to OTUk adaptation function (OTSiG/OTUk_A)
������ 16.4� ���OTSiG to OTUkV adaptation function (OTSiG/OTUkV_A)����������
������ 16.5���� OTSi to OTUCn adaptation function (OTSi/OTUCn_A)
������ 16.6���� OTSiG to OTUCn adaptation function (OTSiG/OTUCn_A)����������
������ 16.7���� OTSi to FlexO adaptation function (OTSiG/FlexO_A)��
������ 16.8���� OTSiG to FlexO adaptation function (OTSiG/FlexO_A)
������ 16.9���� OTSi to OSC adaptation function (OTSi/OSC_A)�����������
17���� Media element�����
Annex A � Optical section (OSx) and constant bit rate (CBRx) layer functions����
������� A.1���� Connection functions
������� A.2���� Termination functions�������������
������� A.3���� Adaptation functions
����� Page
Annex B � Generic FlexE and FlexO supervision and processes����
������� B.1���� Supervision��
������� B.2���� Generic processes�����
Appendix I � Applications and functional diagrams����
������� I.1���� Transparent CBRx tributary interface port with optional SDH RS non-intrusive monitor on OTN equipment����
������� I.2���� SOTU tributary interface port on OTN equipment���������
������� I.3���� Selectable CBRx/SOTU tributary interface port on OTN equipment��������
������� I.4���� SOTU interface ports on non-OTN equipment�
������� I.5���� MOTUm interface port with 3-R regeneration functionality for an ODUk connection function����
Appendix II � Blank appendix����
Appendix III � Performance of processes����
����� III.1���� Introduction��
����� III.2���� OTUk frame alignment process�������������
����� III.3���� STAT acceptance process and related defect detection
����� III.4���� OTU dIAE, OTU dBDI, ODU dBDI detection��������
����� III.5���� PT acceptance process and ODUPdPLM detection��������
����� III.6���� Generic AIS and OTUk AIS detection����
����� III.7���� OTU and ODUT dBIAE detection process�����������
Appendix IV � TTI processing examples����
������ IV.1���� Example 1������
������ IV.2���� Example 2������
Appendix V � Blank appendix����
Appendix VI � OTSi client mapping of pre-OTN signals����
������ VI.1���� OTSi to CBRx adaptation (OTSi/CBRx_A)����������
������ VI.2���� OTSi to GbE adaptation function (OTSi/GbE_A)�������������
������ VI.3���� OTSi to RSn adaptation (OTSi/RSn_A)
Appendix VII � Examples of media elements����
Appendix VIII � OMS trail protection����
���� VIII.1���� OMS trail protection sub-layer functions���������
Bibliography����