CONTENTS

Policy on Intellectual Property Right (IPR)
Annex� 1� Operational characteristics of an AIS using TDMA techniques in the VHF maritime mobile band
�1���� General
�2���� AIS equipment
������� 2.1���� AIS VHF data link (VDL) non-controlling stations
����������������� 2.1.1���� AIS shipborne station
����������������� 2.1.2���� Aids to navigation-AIS station
����������������� 2.1.3���� Limited base station (no VDL control functionality)
����������������� 2.1.4���� Search and rescue mobile aircraft equipment
����������������� 2.1.5���� Repeater station
����������������� 2.1.6���� AIS search and rescue transmitter (AIS-SART station)
������� 2.2���� AIS VDL controlling stations
����������������� 2.2.1���� Base station
�3���� Identification
�4���� Information content
������� 4.1���� Short safety related messages
������� 4.2���� Information update intervals for autonomous mode
����������������� 4.2.1���� Reporting interval
�5���� Frequency band
Annex� 2� Technical characteristics of an AIS using TDMA techniques in the maritime mobile band
�1���� Structure of the AIS
������� 1.1���� AIS layer module
������� 1.2���� Responsibilities of AIS layers for preparing AIS data for transmission
����������������� 1.2.1���� Transport layer
����������������� 1.2.2���� Network layer
����������������� 1.2.3���� Link layer
����������������� 1.2.4���� Physical layer
�2���� Physical layer
������� 2.1���� Parameters
����������������� 2.1.1���� General
����������������� 2.1.2���� Constants
����������������� 2.1.3���� Transmission media
����������������� 2.1.4���� Dual channel operation
������� 2.2���� Transceiver characteristics
������� 2.3���� Modulation scheme
����������������� 2.3.1���� GMSK
����������������� 2.3.2���� Frequency modulation
����������������� 2.3.3���� Frequency stability
������� 2.4���� Data transmission bit rate
������� 2.5���� Training sequence
������� 2.6���� Data encoding
������� 2.7���� Forward error correction
������� 2.8���� Interleaving
������� 2.9���� Bit scrambling
������ 2.10���� Data link sensing
������ 2.11���� Transmitter transient response
����������������� 2.11.1���� Switching time
������ 2.12���� Transmitter power
������ 2.13���� Shutdown procedure
������ 2.14���� Safety precautions
�3���� Link layer
������� 3.1���� Sub-layer 1: medium access control
����������������� 3.1.1���� TDMA synchronization
����������������� 3.1.2���� Time division
����������������� 3.1.3���� Slot phase and frame synchronization
����������������� 3.1.4���� Slot identification
����������������� 3.1.5���� Slot access
���������� �������3.1.6���� Slot state
������� 3.2���� Sub layer 2: data link service
����������������� 3.2.1���� Data link activation and release
����������������� 3.2.2���� Data transfer
����������������� 3.2.3���� Error detection and control
������� 3.3���� Sub layer 3 � link management entity
����������������� 3.3.1���� Access to the data link
����������������� 3.3.2���� Modes of operation
����������������� 3.3.3���� Initialisation
����������������� 3.3.4���� Channel access schemes
����������������� 3.3.5���� Autonomous and continuous operation
����������������� 3.3.6���� Assigned operation
����������������� 3.3.7���� Message structure
�4���� Network layer
������� 4.1���� Dual channel operation and channel management
����������������� 4.1.1���� Operating frequency channels
����������������� 4.1.2���� Normal default mode of dual channel operation
����������������� 4.1.3���� Regional operating frequencies
����������������� 4.1.4���� Regional operating areas
����������������� 4.1.5���� Transitional mode operations near regional boundaries
����������������� 4.1.6���� Channel management by manual input
����������������� 4.1.7���� Resumption of operation after power on
����������������� 4.1.8���� Priority of channel management commands and clearing of stored regional operating settings
����������������� 4.1.9���� Conditions for changing both AIS operational frequency channels
������� 4.2���� Distribution of transmission packets
����������������� 4.2.1���� The user directory
����������������� 4.2.2���� Routing of transmission packets
����������������� 4.2.3���� Management of priority assignments for messages
������� 4.3���� Changing reporting interval
����������������� 4.3.1���� Autonomously changed Rr (continuous and autonomous mode)
����������������� 4.3.2���� Assigned Rr
������� 4.4���� Data link congestion resolution
����������������� 4.4.1���� Intentional slot reuse by the own station
����������������� 4.4.2���� Use of assignment for congestion resolution
������� 4.5���� Base station operation
������� 4.6���� Repeater operation
����������������� 4.6.1���� Repeat indicator
����������������� 4.6.2���� Duplex repeater mode
����������������� 4.6.3���� Simplex repeater mode
������� 4.7���� Handling of errors related to packet sequencing and groups of packets
�5���� Transport layer
������� 5.1���� Definition of transmission packet
������� 5.2���� Conversion of data into transmission packets
����������������� 5.2.1���� Conversion to transmission packets
������� 5.3���� Transmission packets
����������������� 5.3.1���� Addressed Messages 6 and 12
����������������� 5.3.2���� Broadcast messages
����������������� 5.3.3���� Conversion to presentation interface messages
������� 5.4���� Presentation interface protocol
Annex 3� AIS channel management by digital selective calling messages
�1���� General
�2���� Scheduling
�3���� Regional channel designation
�4���� Regional area designation
Annex� 4� Long-range applications
�1���� General
�2���� Long-range applications by interface to other equipment
�3���� Long-range applications by broadcast
������� 3.1���� Packet bit structure for the AIS long-range broadcast message
������� 3.2���� Long-range AIS broadcast message
������� 3.3���� Transmission method for the long-range AIS broadcast message
����������������� 3.3.1���� Transmission interval
� ����������������3.3.2���� Access scheme
����������������� 3.3.3���� AIS shore station qualifier
����������������� 3.3.4���� Transmitting the long-range broadcast message
Annex 5� Application specific messages
�1���� General
������� 1.1���� Binary messages
������� 1.2���� Definition of application identifiers
������� 1.3���� Definition of function messages
�2���� Binary data structure
������� 2.1���� Application identifier
����������������� 2.1.1���� Test application identifier
����������������� 2.1.2���� International application identifier
�3���� Guidelines for creating functional messages
������� 3.1���� International functional messages
������� 3.2���� Regional functional messages
�4���� Guidelines for drafting functional messages
�5���� Definitions of system related international function messages
������� 5.1���� IFM 0: Text using 6-bit ASCII
������� 5.2���� IFM 2: Interrogation for a specific FM
������� 5.3���� IFM 3: Capability interrogation
������� 5.4���� IFM 4: Capability reply
������� 5.5���� IFM 5: Application acknowledgement to an addressed binary message
Annex 6� Sequencing of transmission packets
Annex 7� Class B AIS using CSTDMA technology
�1���� Definition
�2���� General requirements
������� 2.1���� General
����������������� 2.1.1���� Capabilities of the Class B �CS� AIS
����������������� 2.1.2���� Modes of operation
�3���� Performance requirements
������� 3.1���� Composition
������� 3.2���� Operating frequency channels
������� 3.3���� Internal GNSS receiver for position reporting
������� 3.4�� ��Identification
������� 3.5���� AIS Information
����������������� 3.5.1���� Information content
����������������� 3.5.2���� Information reporting intervals
����������������� 3.5.3���� Transmitter shutdown procedure
����������������� 3.5.4���� Static data input
�4���� Technical requirements
������� 4.1���� General
������� 4.2���� Physical layer
����������������� 4.2.1���� Transceiver characteristics
����������������� 4.2.2���� Transmitter requirements
����������������� 4.2.3���� Receiver parameters
������� 4.3���� Link layer
����������������� 4.3.1���� Link sub-layer 1: medium access control
����������������� 4.3.2���� Link sub-layer 2: data link service
����������������� 4.3.3���� Link sub-layer 3 � link management entity
������� 4.4���� Network layer
���� �������������4.4.1���� Dual channel operation
����������������� 4.4.2���� Channel management
����������������� 4.4.3���� Distribution of transmission packets
����������������� 4.4.4���� Data link congestion resolution
������� 4.5���� Transport layer
����� ������������4.5.1���� Transmission packets
����������������� 4.5.2���� Sequencing of data packets
������� 4.6���� DSC channel management
����������������� 4.6.1���� DSC functionality
����������������� 4.6.2���� DSC time-sharing
Annex 8� AIS messages
�1��� �Message types
�2���� Message summary
�3���� Message descriptions
������� 3.1���� Messages 1, 2, 3: Position reports
������� 3.2���� Message 4: Base station report
������� 3.3���� Message 5: Ship static and voyage related data
����������������� 3.3.1���� The data terminal equipment indicator
����������������� 3.3.2���� Type of ship
����������������� 3.3.3���� Reference point for reported position and overall dimensions of ship
������� 3.4���� Message 6: Addressed binary message
������� 3.5���� Message 7: Binary acknowledge
������� 3.6���� Message 8: Binary broadcast message
������� 3.7���� Message 9: Standard SAR aircraft position report
������� 3.8���� Message 10: UTC and date inquiry
������� 3.9���� Message 11: UTC/date response
������ 3.10���� Message 12: Addressed safety related message
������ 3.11���� Message 13: Safety related acknowledge
������ 3.12���� Message 14: Safety related broadcast message
������ 3.13���� Message 15: Interrogation
������ 3.14���� Message 16: Assigned mode command
������ 3.15�� ��Message 17: GNSS broadcast binary message
������ 3.16���� Message 18: Standard Class B equipment position report
������ 3.17���� Message 19: Extended Class B equipment position report
������ 3.18���� Message 20: Data link management message
������ 3.19� ���Message 21: Aids-to-navigation report (AtoN)
������ 3.20���� Message 22: Channel management
������ 3.21���� Message 23: Group Assignment Command
������ 3.22���� Message 24: Static data report
������ 3.23���� Message 25: Single slot binary message
����� �3.24���� Message 26: Multiple slot binary message with communications state
������ 3.25���� Message 27: Long-range AIS broadcast message
Annex 9� Requirements for stations using burst transmissions
�1���� Requirements for stations using burst transmissions
�2���� Transceiver characteristics
�3���� Transmitter requirements
�4���� Synchronization accuracy
�5���� Channel access scheme
�6���� User ID (Unique identifier)
Annex 10 �Abbreviations in use in this Recommendation