Report ITU-R BT.2467-3
Policy on Intellectual Property Right (IPR)
PART 1
�1���� Introduction
�2���� Assumptions for DVB-T2
�3���� Overview on the reference parameters
�4���� Description of the laboratory measurements done to define the method
������� 4.1���� Description of the laboratory measurements (MFN)
������� 4.2���� Description of the laboratory measurements (SFN)
������� 4.3���� Description of some results of the laboratory measurements for
the MFN
������� 4.4���� Description of some results of the laboratory measurements for
the SFN
����������������� 4.4.1���� Dependency on the received level for the SFN case
�5���� Criteria for DVB-T2
������� 5.1���� MFN Networks
����������������� 5.1.1���� Dependency of the MFN method on the model of the
receiver
������� 5.2���� SFN Networks
����������������� 5.2.1���� Dependency of the SFN method on the model of
receiver
����������������� 5.2.2���� Examples of application of the SFN criteria
�6���� Conclusions
�7���� References
Annex 1 to Part 1� Example of the method to obtain the additional margin Lcmfn
Annex 2� to Part 1� Results of DVB-T2 laboratory measurements (SFN)
Annex 3� to Part 1� Summary of the values needed to obtain the margin to the
failure point
Annex 4� to Part 1� Laboratory tests on DVB-T2 performed by Rai Way S.p.A
PART 2
�1���� Introduction
�2���� Laboratory measurements
�3���� On field measurements
Annex 1� to Part 2� Professional vs monitoring DVB-T2 test equipment comparison
PART 3
�1���� Introduction
�2���� DVB-T2 VHF / UHF trials in Sydney, Australia
������� 2.1���� Objectives
������� 2.2���� Results
������� 2.3���� Methodology adopted for objective quality assessment of DVB-T2
coverage
������� 2.4���� Objective quality assessment of DVB-T2 signal quality /
coverage for Sydney Trials
������� 2.5���� Preliminary analysis of Sydney VHF/UHF trials measurement data
������� 2.6���� Next steps
�3���� Gold Coast UHF replication trial
������� 3.1���� Objectives
������� 3.2���� Preliminary results
������� 3.3���� Observations � Overall findings
������� 3.4���� Comparative assessment of Sydney Trials to Gold Coast Trials
�4���� Brisbane/Gold Coast Extended DVB � T2 SFN Trial
������� 4.1���� Objectives
������� 4.2���� Measurement data analysis
������� 4.3���� Observations
PART 4
�1���� Purpose of the experimentation
������� 1.1���� DVB-T2 and DVB-T modes used in the trial
�2���� Detail of system and equipment
������� 2.1���� Local head-end and satellite signal transport
������� 2.2���� Choice of area and transmission stations
�3���� Measures
������� 3.1���� Measurement and instrumentation modes
������� 3.2���� Reception system
�4���� Conduct of the trial
������� 4.1���� Different phases of experimentation
������� 4.2���� Field measurements and method described in Part 1 of this
Report
������� 4.3���� �Expected� value
�5���� Results for DVB-T2 M02 mode
������� 5.1���� Comparison of estimation and measures
������� 5.2���� Coverage and C/(N+I)
������� 5.3���� Basic results with the method indicatedin Part 1 of this Report
������� 5.4���� Results with the proposed changes to the method in Part 1 of
this Report
�6���� Future developments
�7���� Final comments
Annex 1� to Part 4� Measurement system and report details
������� 1.1���� Measuring system
������ 1.2 �����Example of DVB-T/H measurement report
������� 1.3���� Example of DVB-T2 measurement report
Annex 2� to Part 4� Formulas for deriving the margin and possible proposed
changes
������� 2.1���� Formulas for obtaining margin
������� 2.2���� Possible proposed changes
Annex 3� to Part 4� Detail of some of the results of the trial
Annex 4 to Part 4� Method for establishing the �expected margin�
Annex 5� to Part 4� List of measuring points
Annex 6 to Part 4� Archive of DVB_T2 measures
Annex 7 to Part 4� Results with DVB-T2 Mode M05
PART 5
�1���� Introduction
�2���� Analysis of the measurements
�3���� Analysis of the SFN
�4���� Setting the scale of quality
�5���� Extension of the method to the MFN
�6���� Conclusion