Policy on Intellectual Property Right (IPR)
�1���� Executive summary
�2���� Abbreviations
�3���� Useful definitions
������� 3.1���� Radio frequency
signal-to-interference ratio (S/I)
������� 3.2���� Radio frequency
protection ratio (PR)
������� 3.3���� Receiver (front-end)
overload threshold
������� 3.4���� Adjacent channel
leakage power ratio
������� 3.5���� �Can� tuners
������� 3.6���� �Silicon� tuners
�4���� References
������� 4.1���� Broadcasting
technology characteristics
������� 4.2���� Mobile technology
characteristics
�5���� Measurement methodology
������� 5.1���� Example test setup
������� 5.2���� Wanted signal levels
������� 5.3���� Frequency offsets
between interfering signal and wanted signal
������� 5.4���� Measurements in the
presence of a time varying interfering signal
������� 5.5���� UMTS uplink
������� 5.6���� LTE � downlink
������� 5.7���� LTE � uplink
������� 5.8���� Interferer reference
power level
������� 5.9���� Characterization of
the interfering signal
������ 5.10���� Failure point
assessment methods
����������������� 5.10.1���� ESR5
Criterion for the Assessment of DTT Transmission Quality
������ 5.11���� Method for determining
protection ratios and overload thresholds
�6���� Conclusions and further work
required
����� ������������A.1.1���� Measurements
of protection ratios and overload thresholds for DVB-T receivers under
interference from DVB-T in adjacent channels
����������������� A.1.2���� Measurements
of protection ratio and overload threshold for DVB-T receivers under
interference from UMTS BS and UE in co- and adjacent channels
����������������� A.1.3���� Measurements
of protection ratios and overload thresholds for DVB-T receivers under
interference from LTE BS and UE in co- and adjacent channels
��������������� ��A.2.1���� Measurements
of protection ratios and overload thresholds for DVB-T2 receivers under
interference from DVB-T2 in other channels
����������������� A.2.2���� Measurements
of protection ratios and overload thresholds for DVB-T2 receivers under interference
from LTE BS in co- and adjacent channels
����������������� A.2.3���� Measurements
of protection ratios and overload thresholds for DVB-T2 receivers under
interference from LTE UE in adjacent channels
����������������� A.2.4���� Measurements
of protection ratios and overload thresholds for DVB-T2 receivers under
interference from wireless broadband access systems in co- and adjacent
channels
����������������� A.3.1���� Measurements
of protection ratios and receiver desensitisation for ATSC receivers under
interference from ATSC on adjacent channels
����������������� A.3.2���� Measurements
of protection ratios for ATSC receivers under interference from LTE BS in co-
and adjacent channels